Sunday, March 27, 2016

GROUND SUPPORT SYSTEM

When we at In-House Production comes up with a design and put together, We don't stop there. We climb all over it before we do anything with it. We are trying a new design for an outdoor event with towers and out-riggers. The first photo here is some of the guys that take part in the design as we work on something. As you look at the photos, you will some of the ideas we come up with.
The Shop Crew

As we started to put the leg together we decided to take some of our Hand Rails for our Decking, add a couple parts we had in the shop and come-up with Hand Rails (bike-racks). Free standing good looking barriers to keep those away from the free standing towers.
Hand-Rails used for Barriers

After taking IHP's 1300 pound Base Weight, bolt 20.5" truss to it, sliding on the sleeve block, install the head block, bolt on the horizontal truss to the sleeve block and lift the rig with 1 ton chain motor. When the horizontal truss was in the air, we add our out-riggers. When it was all up, we stood back and looked at the rig, We then take a scissor lift and went up to the center of the horizontal span and started shake the truss violently to see what happens all the way down to the ground,  also where the weak points are. This is where it becomes fun. 

We have 2 legs and 50 foot span for lights only. This will work for that but if we added a video wall to the truss, we would need a lot more support.  

Looking Down the Truss

Leg and all parts 
After coming us with this, we are looking at a way to add our lifting unit to stand the truss up. Look for that in the near future.









With a little black paint and the out-riggers will become black. In the dark of the night the whole rig disappears and all you will see is the lights.






If you have comments, please let us know what they are as we at In-House Production like comments. If you want more information, give us a call or come by.
In-House Production
6620 W Arby Ave
Las Vegas, NV 89118
702-631-4748
info@ihplabor  

Friday, March 25, 2016

CARTS FOR PIPE & DRAPE BASE PLATES

Pipe and Drape BASE PLATE CART. We call them FLOPPY BASE STAND CART. I hope you are old enough to remember what a floppy disk is.  
                                                                                                                                                             
If you look at the Pipe & Drape Base Plates, and how the plates slid into their slots, it has the look of those OLD FLOPPY DISKS used with computers.

Pipe and Drape Base Plate Carts
Floppy Base Stand for Pipe and Dra

       Floppy Base Plate Carts are 30" x 30" and stackable. Add a slid-on Casters Wheels to the cart and they are ready to roll. Slid off the Casters and the Cart are ready to Stack. This one just came off the design and build work table.


Pipe and Drape Base Plate Carts
This is something NEW from
IN-House Production. We made them for our convenience, but can they could work for you. We will build more.

When we powder coated ours, we use the color Yellow. We can paint whatever your color may be.

Give Jeff a call to see what it would take for you to have this convenience in your shop or show site,

In-House Production
702-631-4748
info@ihplabor.com

Thursday, March 17, 2016

STRUCTURE FOR A VIDEO WALL CLIMBING SYSTEM

What do you hang a 8 by 16 foot video wall from and have it 6' off the ground and only use a small foot print in a walkway next to a pool. A very large pool.
            
          

 Ask In-House Production. With a custom design and build, we take all our erector set parts and other toys we have in stock and come up with some very safe and creative design. 


All you do is take a rated tower truss system with some special parts and you have a video wall hanging system that give you 2 back legs.


All you do is start at the bottom and keep working up. At the end of the day, all you do is push 1 button and up the video wall goes. 

When in Las Vegas, give In-House Production a call and we can help your design out
702-631-4748

Monday, March 14, 2016

NEWS MEDIA PLATFORM FOR RALLY

So what happens when you need to have platforms installed over audience chairs for the news media to put their Cameras and Staff on for that VERY BIG EVENT.
If you have a need, give In-House Production a call. We have Platforms, we have Handrails, we have Stairs and we have Legs for all those unknowns problems that happens when having to make a LEVEL SURFACE on UN-LEVEL SURFACE.

In-House Production has the PLATFORMS, and TALENT to make all this happen on TIME and within your BUDGET........

Check-out our RENTAL CATALOG at www.ihplabor.com and see how we can help make your life at your event easier. We also have LABOR for your EVENT.......

GIVE
IN-HOUSE PRODUCTION A CALL AT
702-631-4748
OR
info@ihplabor.com

Monday, March 7, 2016

SAFELY CLIMB UP THE SIDE OF AN I-BEAM



              WHY CLIMB UP THE SIDE OF AN I- BEAM


                                

   WHEN YOU CAN WALK UP THE BEAM


YOU CAN EVEN TAKE A FRIEND ALONG. 

WE AT IN-HOUSE PRODUCTION FOUND A NEW TOY
A SAFE WAY TO CLIMB UP THE SIDE OF A I-BEAM
GIVE US A CALL OR COME BY AND GIVE IT A TRY 
6620 W ARBY AVE
LAS VEGAS, NV 89118
702-631-4748