Friday, August 2, 2013

PIPE INSERTS FOR 1-1/4" and 1-1/2" PIPE

In-House Production is that company that takes IDEAS from everywhere and makes them better. We make WIDGETS. Our new widget is a takeoff with a twist. We made it BETTER.


VIEW AS TO HOW IT WORKS
There are all kinds of ways to bring 2 pipe together, Some look bulky and add height to the pipe, some thread on the pipe and some go inside but need to be bolted through the insert and the pipe leaving bolt heads and nuts sticking outside the pipe. Bolting works great for that long term install where its there for years.


WHAT IT LOOK LIKE TOGETHER. NICE AND CLEAN
When it comes to that clean look for  Conventions or Trade Shows and Event, we have the answer. THE PIPE PECKER. A pipe insert that is able to take 2 pipes and put both together and make 1 pipe with the use of a 1/4" Allen Wrench. We have added 2 spring pins that hold both inter bars together so they can be used Vertical or Horizontal. This also keeps from becoming free and taking the chance of losing parts.

We have also designed 2 and 3 way corners to be used with the pipe peckers. We have designed with the idea of a 6" overall splice. This gives you a simple way when adding the length of pipe you will need.
 

1-1/2" 3 WAY CORNER

1-1/2" 2 WAY CORNER (90)


Add caption

YOU CAN SLIDE DRAPE OVER THIS
Look for the 4 way 5 way and 6 way corners for both 1-1/4" and 1-1/2" pipe and tubing. You cam RENT or BUY any or all the items.

In-House Production * Tel: 702-631-4748 or info@ihplabor.com  



 

No comments: