PIPE INSERTS FOR 1-1/4" and 1-1/2" PIPE

In-House Production is that company that takes IDEAS from everywhere and makes them better. We make WIDGETS. Our new widget is a takeoff with a twist. We made it BETTER.



VIEW AS TO HOW IT WORKS

There are all kinds of ways to bring 2 pipe together, Some look bulky and add height to the pipe, some thread on the pipe and some go inside but need to be bolted through the insert and the pipe leaving bolt heads and nuts sticking outside the pipe. Bolting works great for that long term install where its there for years.



WHAT IT LOOK LIKE TOGETHER. NICE AND CLEAN

When it comes to that clean look for  Conventions or Trade Shows and Event, we have the answer. THE PIPE PECKER. A pipe insert that is able to take 2 pipes and put both together and make 1 pipe with the use of a 1/4" Allen Wrench. We have added 2 spring pins that hold both inter bars together so they can be used Vertical or Horizontal. This also keeps from becoming free and taking the chance of losing parts.

We have also designed 2 and 3 way corners to be used with the pipe peckers. We have designed with the idea of a 6" overall splice. This gives you a simple way when adding the length of pipe you will need.
 


1-1/2" 3 WAY CORNER

1-1/2" 2 WAY CORNER (90)



Add caption

YOU CAN SLIDE DRAPE OVER THIS

Look for the 4 way 5 way and 6 way corners for both 1-1/4" and 1-1/2" pipe and tubing. You cam RENT or BUY any or all the items.

In-House Production * Tel: 702-631-4748 or info@ihplabor.com  

 

24" BASE PLATES FOR 12" AND 20.5" ALUMINUM TRUSS

IN-HOUSE PRODUCTION found a need for 24"x 24" steel base plates. Made from 2" x 2" x 1/4" wall tubing and 1/4" x 2" angle iron for that special look.

Base Plates are drilled for both 12" and 20.5" truss. With 20.5" truss you have 2" on all 4 sides of the truss and 6" over on all 4 sides with 12" truss. SMALL FOOT PRINT for that tight space. The reason for steel is all about bottom weight. Those 24" x 24" Steel Base Plates come in at a weight of 55 pounds.

55 Pounds, 24" x 24" foot print, bottom weight. No more bolting the truss as the base plate is on ts side. Bolt the Truss to the Base Plate with the base plate sitting flat on the ground.

Base Plate with 12" x 12" turss

Stand Alone Base Plate 

Base Plate with 20.5" x 20.5" Truss

This is a great addition to our Rental of Base Plates. We have now in stock, 24" x 24" Steel Base Plate, 30" x 30" Aluminum Base Plates and 42" x 42" Steel Base Plates.

"RENT THEM,  BUY THEM, WE HAVE THEM WHEN YOU NEED THEM"

In-House Production - tel 702-631-4748 or info@ihplabor.com.