NEW PIPE GRID FOR LIGHTING

BUILDING AND INSTALLING THIS LIGHTING 1-1/2" PIPE GRID.                      It was great working with Jim Reid with JR Lighting. JR Lighting gave In-House Production a call to supply and install this      1-1/2" pipe grid used to hang Lighting Instruments from for a new room in the news studio. After the site survey, In-House Production came up with what would be needed to accomplish this project. Custom Steel Brackets, 1/4" Aircraft Cable, Shackles, Pipe Hangers, 1-1/2" Schedule 40 Black Pipe and T Clamps to Bolt the Cross Pipes Together. Parts.

After meeting Jim with JR Lighting and the Studios Project Manager Mark, I let both know, hanging this Grid in this designated space was no problem. This is what In-House Production does. All we need was 2 days and a clear floor to hang this Grid. I then let Jim know I had the perfect crew to install this grid and Jim knew the both of them. Jim's Brother and Nephew.

If you know of the JR's (Reid's), you will have guessed there were 3 JR's involved with this project. Jim Reid went into Lighting, Joe Reid went into Rigging and Joe's son followed his dad and became a Rigger too. As you look at the photo, you will see Joe and Joe.  The first Joe with the long sleeves in the photo is Jim's Brother and the other Joe is Joe's son. So we have Joe Reid and Joe Reid installing the grid and Jim Reid with JR Lighting asking In-House Production to do this job. In-House Production does Rigging. 

You would think, JR would wear In-House Production shirts on the job, but no, they had on JR Lighting shirts. Take a close look. JR's wearing JR Lighting shirts. It fit. JR Lighting Rigging job done by In-House Production.

NEED A PIPE GRID, NEED A LIGHTING GRID, GIVE IN-HOUSE PRODUCTION A CALL AT 702-631-4748 OR EMAIL US AT: INFO@IHPLABOR.COM.