WHAT ARE WE DOING AT IN-HOUSE PRODUCTION

BOTTOMS TO DISPLAY CASE

To give you some Ideas as to what we have been doing at In-House Production, have a look at some of the photos I have added to this blog. For the past several months, it seems like some of our jobs In-House Production has involved Rigging and Rigging Design, Installation, Dismantle from hanging tons from the ceiling to working with some very Breakable Glass items. Our Crews can work in that GLASS SHOP or with NON-BREAKABLE GEAR

BOTTOMS AND SIDE TO DISPLAY CASE

DISPLAY CASE GLASS SIDE DOLLIES

Some of the photos show some Cases we have build for storage of Glass Display Cases. Dollies to hold Glass for the sides of the displays and the bottom and tops in slid in custom cases. This is one of the many items we have build or installed. 

DOLLIES WITH-OUT GLASS

One of our new builds are "CHICAGO BEAM CLAMPS". What is a CHICAGO BEAM CLAMP you ask. This is one of those 3" channel with an eye-bolt in the center, Slip Resistant Notches and Clamp Tabs that go over the Flange of the I-Beam. You have seen them, you have used them, We have a NAME for them, "CHICAGO BEAM CLAMPS". Royle came up with a great name for the beam clamps, and you heard it here first. We did not design them, We MADE THEM BETTER. Look for Photos in our Next Blog.

DIVERTER SHEAVES  TO MOVE CABLE DOWN-STAGE

Diverters used to move lift cable Down-Stage for a special project we are working on. 

IF YOU HAVE A NEED FOR THAT SPECIAL HELP, WORKING ON DESIGNS AND TO TALK TO SOMEONE ABOUT THE IDEA, OR NEED HELP WITH HOW-TO

GIVE IN-HOUSE PRODUCTION A CALL AT 702-631-4748

NEED TO RENT SOME RIGGING GEAR, GIVE ROYLE A CALL

NEED THAT EVENT LABOR INSTALL CREW, GIVE CHASE A CALL

NEED TO PURCHASE ONE OF THE ITEMS WE SALE, GIVE KYLA A CALL

IN-HOUSE PRODUCTION LIKES TO HELP.

info@ihplabor.com  

NEW PIPE GRID FOR LIGHTING

BUILDING AND INSTALLING THIS LIGHTING 1-1/2" PIPE GRID.                      It was great working with Jim Reid with JR Lighting. JR Lighting gave In-House Production a call to supply and install this      1-1/2" pipe grid used to hang Lighting Instruments from for a new room in the news studio. After the site survey, In-House Production came up with what would be needed to accomplish this project. Custom Steel Brackets, 1/4" Aircraft Cable, Shackles, Pipe Hangers, 1-1/2" Schedule 40 Black Pipe and T Clamps to Bolt the Cross Pipes Together. Parts.

After meeting Jim with JR Lighting and the Studios Project Manager Mark, I let both know, hanging this Grid in this designated space was no problem. This is what In-House Production does. All we need was 2 days and a clear floor to hang this Grid. I then let Jim know I had the perfect crew to install this grid and Jim knew the both of them. Jim's Brother and Nephew.

If you know of the JR's (Reid's), you will have guessed there were 3 JR's involved with this project. Jim Reid went into Lighting, Joe Reid went into Rigging and Joe's son followed his dad and became a Rigger too. As you look at the photo, you will see Joe and Joe.  The first Joe with the long sleeves in the photo is Jim's Brother and the other Joe is Joe's son. So we have Joe Reid and Joe Reid installing the grid and Jim Reid with JR Lighting asking In-House Production to do this job. In-House Production does Rigging. 

You would think, JR would wear In-House Production shirts on the job, but no, they had on JR Lighting shirts. Take a close look. JR's wearing JR Lighting shirts. It fit. JR Lighting Rigging job done by In-House Production.

NEED A PIPE GRID, NEED A LIGHTING GRID, GIVE IN-HOUSE PRODUCTION A CALL AT 702-631-4748 OR EMAIL US AT: INFO@IHPLABOR.COM.