IN-HOUSE PRODUCTION (IHP) TURNS TWENTY-FIVE (25) YEARS OLD.

 In February 2001, In-House Production (IHP) opened its doors with a clear mission: to provide exceptional union stagehand labor for shows and events of every scale. Twenty-five years later, we remain proudly committed to that mission, continuing to deliver industry-leading labor services while expanding our capabilities to include rigging and staging rental and sellable equipment, ballast weight, steel fabrication, and a growing range of production solutions. 

The first 25 years have been extraordinary, marked by growth, innovation, and the trust of our clients and partners. We look forward to the next 25 years with confidence and excitement, and to all the opportunities they will bring.

THANK YOU FOR 25 YEARS. 

BALLAST WEIGHT AT IN-HOUSE PRODUCTION (ULTRA-CUBE)

 IHP IS AT IT AGAIN. WE HAVE DESIGNED AND BUILT THE ULTIMATE ENTERTAINMENT BALLAST WEIGHT WE CALL ULTRA-CUBE. THE PICTURE BELOW SAYS IT ALL.

DO YOU NEED TO BOLT TRUSS IN THE CENTER OF THE CUBE, OR ON THE EDGES. THE TOP PLATE WITH ALL ITS BOLT HOLES LETS YOU DO THAT.  

YOU CAN BOLT 12"X12" OR 20.5"X20.5" ALUMINUM TRUSS TO THE TOP IN DIFFERENT CONFIGURATIONS AND 12"X12" OR 20.5"X20.5" TRUSS TO ALL FOUR (4) SIDES FOR OUTRIGGERS OR BOLTING THE ULTRA-CUBES TOGETHER.

THE SQUARE SIDE HOLES AT THE TOP OF EACH SIDE HAVE SEVERAL USES. (1) IS FOR GETTING TO THE BOLTS WHEN ADDING TRUSS TO THE TOP LID, AND (2) FOR PICKING THE ULTRA -CUBE UP USING A FORKLIFT. YOU CAN PICK UP THE ULTRA-CUBE FROM ANY SIDE, AND  THE WEIGHT IS ALWAYS BELOW THE FORKLIFT FORKS. THIS HELPS STABILIZE THE LOAD FOR SAFETY.

SCREWJACKS CAN BE USED TO LEVEL THE ULTRA-CUBE WHEN THE GROUND IS NOT LEVEL. 

1. FORKLIFT FRIENDLY

2. ULTIMATE TRUSS CONFIGURATION.

3. SIDE BOLT HOLES FOR 12" AND 20.5" TRUSS CONFIGURATION.

4. LEVEL JACKS TO THAT UNLEVEL PARKING LOT.

5. 4,000 + POUNDS OF WEIGHT.

FOR RENT OR FOR SALE.

CALL TODAY FOR YOUR ORDER OF ULTRA-CUBES.

IN-HOUSE PRODUCTION

702-631-4748 

INFO@IHPLABOR.COM